top of page



Paint That Protects 

Sanitizing matte plastic paint. ZERO bacteria and ZERO mold. With antibacterial activity certificate: it incorporates silver ions that give the dry paint film already applied, resistance to the growth of bacteria (reduction of 99.9% in 24 hours) and molds. ZERO emissions and ZERO odor: with A + low emission certificate, it also has a very low concentration of volatile organic compounds VOC: 0.2 g / l, 150 times less than required for its category.It does not emit an odor when applied, it allows you to enable spaces immediately without discomfort.

  • Sports centres, indoor swimming pools, changing rooms, etc.
  • Food processing plants, supermarkets, etc
  • Clinics, hospitals, homes for the elderly, schools, nurseries, etc.
  • Walls and ceilings
  • Indoors/Outdoors
  • Plaster
  • Cement mortars
  • Brick
  • Dripping effect
  • Drywall (gypsum plasterboard): fibreboard
  • Concrete
  • Because of its low emission and low odour properties, it is particularly recommended for indoor use.

How to apply?

  • Painting brush

  • Roller

  • Air-less gun


How to use,
- Shake the product until it is perfectly homogenized.
- Dilute the product depending on the porosity and state of the support in the first layer.
- Finish with one or more slightly diluted coats until the support is fully covered.
- Do not apply the product at temperatures below 5ºC or on surfaces exposed to strong sunlight.
- Do not wash until after 24 days.
- Never apply outdoors when there is an imminent risk of rain and avoid excessively humid days. - Clean tools with water immediately after use.
- For spraying with Airless equipment, use nozzles with a passage of 15 to 23 inches, pressure ≈ 150 bar.
sa 5º C or on surfaces exposed to strong insolation.
bottom of page